md0-205 Free Demo Download

Certinside offers free demo for md0-205 120 Q&As with Expert Real). You can check out the interface, question quality and usability of our practice exams before you decide to get it.



Download md0-205 dumps Pdf Demo

Download md0-205 dumps iEngine Demo

Real questions and answers
　
　
Exam : McDATA MD0-205
Title : mcdata certified storage network designer exam

1. On the McDATA Intrepid 10000, the upper two or the lower two optical paddles in a Line Module (LIM) cannot both be _____ in a supported configuration.
A. 2 Gbps
B. 4 Gbps
C. 8 Gbps
D. 10 Gbps
Answer: D

2. Which method is best used to specify which servers can access specific LUNs?
A. HBA driver configuration
B. LUN masking in the switch
C. LUN mapping in the server
D. persistent binding in the server
E. LUN masking in the storage array
Answer: E

3. A customer would like to backup an application via the SAN Infrastructure. When the server offloads the backup job to a backup server which performs the backup to SAN attached tape drives, this is a common example of ________________?
A. Server-less backup
B. Hybrid LAN backup
C. Virtual tape backup
D. Tape stripping
Answer: A

4. Which application allows you to export a McDATA SAN Router configuration?
A. EFCM Basic
B. SANtegrity
C. SANavigator
D. EFCM
E. SANvergence Manager
Answer: E

5. Which of the following is required to achieve 99.999% availability?
A. Dual rack installation
B. Separate power circuits
C. Router connectivity to DR site
D. Dual partitioned Intrepid 10000
Answer: B

6. Which two technologies provide Fibre Channel over IP services? (Choose two.)
A. SES
B. iFCP
C. FCIP
D. iSCSI
E. FICON
F. FC-SB2
Answer: BC

7. Click the Exhibit button.
Which technology is illustrated in the exhibit?
A. VPN
B. iFCP
C. FCIP
D. iSCSI
Answer: B

8. A customer has significant power considerations. They want to purchase a switch from McDATA that uses the least power while still maintaining power supply redundancy. Which switch is the best choice for them?
A. Intrepid 10000
B. Intrepid 6140
C. Sphereon 3232
D. Sphereon 4300
E. Sphereon 4500
Answer: E

Real questions and answers
　
　
Exam : McDATA MD0-251
Title : mcdata certified ip san specialist exam

1. Which management interface allows you to create a single uploadable, modifiable configuration file?
A. SNMP
B. Element Manager
C. SANvergence Manager
D. Command Line Interface
Answer: D

2. How many usable addresses are in a Class C network with a subnet mask of 255.255.255.252?
A. 1
B. 2
C. 4
D. 8
Answer: B

3. Which address is a publicly routable IP address?
A. 10.1.1.10
B. 172.16.31.12
C. 192.168.0.1
D. 208.10.1.1
Answer: D

4. With which two network variables (where either one or both are present) should you use Fast Write?on an iFCP port? (Choose two.)
A. 1 ms of latency on iFCP network
B. 2 ms of latency on iFCP network
C. 100 km of distance between iFCP peer ports
D. 200 km of distance between iFCP peer ports
Answer: BD

5. Which two are characterics of synchronous data replication? (Choose two.)
A. More cost effective
B. Increased data protection
C. Acknowledgement of data
D. Supports longer distances
Answer: BC

6. What are the default read and write community strings for the McDATA Eclipse SAN Router? (Choose two.)
A. public
B. Modify
C. private
D. password
E. Password
Answer: AC

7. What type of optics are supported on the Eclipse 2640 SAN Router?
A. ST
B. SC
C. XFP
D. SFP-LC
Answer: D

8. Which UDP port number does SANvergence Manager use?
A. 21
B. 23
C. 161
D. 162
Answer: C

md0-235 Free Demo Download

Certinside offers free demo for md0-235 120 Q&As with Expert Real). You can check out the interface, question quality and usability of our practice exams before you decide to get it.



Download md0-235 dumps Pdf Demo

Download md0-235 dumps iEngine Demo

Real questions and answers
　
　
Exam : McDATA MD0-235
Title : mcdata certified storage network implementer exam

1. Which three procedures require Ethernet LAN access? (Choose three.)
A. accessing Element Manager for SAN Routers
B. planning Fibre Channel and Gigabit Ethernet cable routing
C. configuring Fibre Channel products in-band
D. configuring Fibre Channel products out-of-band
E. accessing Simple Network Management Protocol (SNMP) or remote user workstations
Answer: ADE

2. You are using the EFCM Basic on a Sphereon 4700 Switch to create zone sets. How many active zone sets can you store on the switch using EFCM Basic?
A. 1
B. 2
C. 32
D. 64
Answer: A

3. Which three settings in the Configure Switch Parameter must be set in FICON cascading on an Intrepid?6140 Director? (Choose three.)
A. insistent
B. rerouting delay
C. Domain RSCNs
D. buffer to buffer credits
E. suppress zoning RSCNs on zone set activations
Answer: ABC

4. x and want to compare it with your existing active zone set. What is the most efficient method to accomplish this?
A. use the compare feature in the zoning library
B. generate a Zone Report from Reports menu and compare zones
C. generate a Data Collection and compare the results of Zoning Logs
D. export the existing zone set to a spreadsheet and compare by sorting
Answer: A
6. Which three settings in the Configure Switch Parameter must be set in FICON cascading on an Intrepid?6140 Director? (Choose three.)
A. insistent
B. rerouting delay
C. Domain RSCNs
D. buffer to buffer credits
E. suppress zoning RSCNs on zone set activations
Answer: ABC
7. Which three can be used to change the product network address for an Intrepid 6140? (Choose three.)
A. CLI
B. SANpilot
C. EFC Manager
D. maintenance port
Answer: ABD
8. When you configure a switch or director to operate in Open Fabric Mode 1.0, which feature do you lose?
A. aliases
B. port binding
C. default zone
D. Insistent Domain ID
Answer: C

5. The current fabric has just been consolidated and you now want to properly secure it. Which action ensures that no other switches can be accidentally added to the fabric?
A. disabling Open Fabric Mode
B. enabling McDATA Fabric Mode
C. enabling FMS with Port Binding
D. enabling Enterprise Fabric Mode
Answer: D

6. Which statement is true if only one switch is installed on a dedicated LAN?
A. Network addresses require change.
B. Network addresses do not require change.
C. The MAC address requires change, but the IP address does not require change.
D. The IP address requires change, but the MAC address does not require change.
Answer: B

7. Which three can be used to change the product network address for an Intrepid 6140? (Choose three.)
A. CLI
B. SANpilot
C. EFC Manager
D. maintenance port
Answer: ABD

8. You have created a new zone set with EFCM v8.x and want to compare it with your existing active zone set. What is the most efficient method to accomplish this?
A. use the compare feature in the zoning library
B. generate a Zone Report from Reports menu and compare zones
C. generate a Data Collection and compare the results of Zoning Logs
D. export the existing zone set to a spreadsheet and compare by sorting
Answer: A